Refer to the PDS for detailed information. Check out the instructional video below. ... AWF PRO Sikaflex 1a Kit - One Component, Flexible, Non Sag, Polyurethane Concrete and Masonry Sealant for Vertical and Horizontal Surfaces, Sikaflex 1a 10 oz Limestone (12), AWF 2000 Caulk Gun (1) 4.7 out of … Before bonding / sealing, allow a waiting time of > 30 minutes (< 8 hours). The adhesive is applied in beads or dots on the substrates that are then gently pressed together leaving a thicker layer of adhesive between the objects. Internal and external use. • Floor mouldings and door sills. This dual-purpose material is based on a special moisture-cured polyurethane with an accelerated curing time. However, for optimum adhesion, joint durability and critical, high performance applications the following priming and/or pre-treatment procedures must be followed: Non-porous substrates Aluminium, anodised aluminium, stainless steel, PVC, galvanised steel, powder coated metals or glazed tiles: slightly roughen surface with a fine abrasive pad. Rigid Adhesives. / +40 °C max., min. Fax: +61 2 9725 2605 Sika EBT is named for its elastic bonding technology which bonds to brick, mortar, wood, metals, glass, resins and plastics. Sikaflex-1a can be used in green and damp concrete applications. 01707 394 444, Sika Liquid Plastics Sikaflex®-118 Extreme Grab April 2020, Version 06.01 020513020000000046 PRODUCT DATA SHEET Sikaflex®-118 Extreme Grab CONSTRUCTION ADHESIVE DESCRIPTION Sikaflex®-118 Extreme Grab is a 1- part construction adhesive with very high initial grab which bonds most construction material substrates. Sika Corporation. Sikaflex®-11 FC+ adheres without primers and/or activators. Sikaflex 1A can beused in both vertical and horizontal joints where the maximum depth of sealant is 1/2 in or less. The joint width must be ≥ 10 mm and ≤ 35 mm. Phone: +61 2 9725 1145 After a waiting time of > 15 minutes (< 6 hours). Movement capability of ± 35 (ASTM C 719) Bubble-free curing. Before bonding / sealing, allow a waiting time of > 30 minutes (< 8 hours). Sika Sikaflex EBT+ All-Weather Sealant Clear 300ml (7286D) High strength, multipurpose construction adhesive with fast curing time, powerful initial grab and permenant elasticity. Sikaflex is an all-weather sealant, being high strength and multipurpose construction adhesive. Clean and pre-treat using Sika® Aktivator-205 applied with a clean cloth. SIKA SIKASIL 252 POLYURETHANE STRUCTURAL ADHESIVE Sikaflex 252 is a high quality structural adhesive. Always refer to packaging. Minimum +3 °C above dew point temperature. Allow a further waiting time of > 30 minutes (< 8 hours) before bonding / sealing. ... Sealant for concrete and masonry facades Sikaflex® AT Facade. Sikaflex 1A is excellent for small joints and fillets, windows, door frames, reglets, flashing, roofing detail applications, and many construction adhesive projects. Internal and external use. Apply Sika® Primer-3 N applied by brush. Our fast-setting anchoring adhesives are ideal for anchoring projects requiring various levels of strength. ... SikaBond-52 Parquet is a solvent-free and fast curing elastic adhesive for wood flooring. Sikaflex® Construction+. SikaLatex R Concrete Bonding Adhesive/Acrylic Fortifier Is an acrylic bonding agent and admixture for use with concrete, mortar and grout. Miller Street Overview : Presentation : SIKA Sikaflex 521 UV Hybrid Sealant Glue - White - 600ml, ideal for all your waterproofing or permanent gluing work. Wetherill Park, NSW, 2164 Suitable for structural joints that will be subjected to dynamic stresses. The substrate must be of sufficient strength to manage with the stresses induced by the sealant during movement. 4.7 out of 5 stars 154. for porous substrates like concrete, bricks and masonry, choose Sika’s advanced polyurethane sealants. Uses: An elastic adhesive for: • Cover plates, gaskets and coverings. The substrate must be of sufficient strength to resist with the stresses induced by the sealant during movement. ... Sikaflex® PRO-3. Internal … Before bonding / sealing, allow a waiting time of > 15 minutes (< 6 hours). Welwyn Garden City Sika House DESCRIPTION Sikaflex 1a is a premium-grade, high-performance, moisture-cured, one-component polyurethane-based, non-sag elastomeric sealant used in certain Sika Sarnafil roofing or waterproofing system flashing details. For cleaning skin use Sika® Cleaning Wipes-100. Internal and external use. Sikaflex®-11 FC+. Good workability. Before bonding / sealing, allow a waiting time of > 15 minutes (< 8 hours). All dust, loose and friable material must be completely removed from all surfaces before application of any activators, primers or adhesive / sealant. Movement capability of ±35 %. Transparent adhesive and sealant. Sika’s range of pro grade, multi-purpose adhesives exhibit superior adhesion to most building materials while still maintaining flexibility, especially during changes in temperature. After several hours to days, the thick layers are cured and the objects are elastically joined. ~0,60 N/mm2 at 100 % elongation (+23 °C). Concrete, aerated concrete and cement based renders, mortars and bricks, prime surface using Sika® Primer-3 N applied by brush. The product must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between +5 °C and +25 °C. (en), Metal Adhesives for Aluminum, Steel and Mixed Materials, Sustainability / Certifications / Approvals, Customer Pricing Portal Account Customers Only,   Sika Corporate Quality Procedure(CQP 049-2), Back to Residential & Commercial Construction, CE Marking and Declaration of Performance to EN 15651-1 - Sealants for non-structural use in joints in buildings - Facade elements: Class F EXT-INT 20HM. Sikaflex®-1a is a premium-grade, high-performance, moisture-cured, 1-component, polyurethane-based, non-sag elastomeric sealant. Compliant to all relevant Australian and US sealant standards, Sikaflex sealant—particularly Pro PU—is suitable for: Expansions joints in a variance of masonry embedment situations. An adhesive to bond construction components and materials such as: PDF - 468 KB Sika Limited Clean all tools and application equipment with Sika® Remover-208 immediately after use. Sikaflex®-298. Sikaflex®-11 FC+ is a 1-part, multipurpose elastic adhesive and joint sealant with very good application properties which bonds and seals most construction material substrates. PVC should be cleaned and pre-treated using Sika® Primer-215 applied with a brush. The joint width must be designed to suit the movement capability of the sealant. Sikaflex®-112 Crystal Clear is a 1-part, multipurpose transparent adhesive and sealant with good initial grab which bonds and seals most construction material substrates. Refer to current price list for packaging variations, Colour range to be defined by local sales organisation. (en), PDF - 161 KB Once cured, hardened material can only be removed mechanically. The substrate must be sound, clean, dry and free of all contaminants such as dirt, oil, grease, cement laitance, old sealants and poorly bonded paint coatings which could affect adhesion of the adhesive / sealant. 01772 259 781, Multipurpose elastic adhesive and joint sealant. All joints must be correctly designed and dimensioned in accordance with the relevant standards and codes of practice before their construction. A width to depth ratio of 2:1 must be maintained. Suitable substrate materials for use with Sika 252 are: Allow a waiting time of > 15 minutes (< 8 hours) before bonding / sealing. FLEXIBLE ADHESIVE AND SEALANT DESCRIPTION Sikaflex®-123 MS Bond is a 1-part, multipurpose ad-hesive and sealant with a very broad adhesion and sealing profile which bonds and seals most construc-tion material substrates. High-performance movement joint sealant Sikasil® Pool. Very good resistance to weathering. Extrude Sikaflex PRO-3 SL into the joint, making sure that the seal lips are in good contact with the joint and filling the joint, avoiding the inclusion of air bubbles. Easy to use and resistant, this glue can be … oz Cartridge, Black. Sikaflex®-118 Extreme Grab CONSTRUCTION ADHESIVE DESCRIPTION Sikaflex®-118 Extreme Grab is a 1- part construction adhesive with very high initial grab which bonds most construction material substrates. Exterior sealant and direct glazing adhesive for organic glass in Marine applications. 3 °C above dew point temperature. Elastic Adhesive Bonding ... Sealant for concrete and masonry facades Sikaflex® Construction is a 1-component, moisture-curing, elastic joint sealant. USES An adhesive to bond most construction components and materials such as: Concrete Masonry Most stones Ceramic / +40 °C max. Sealing of door and window frames. The adhesive is an intermediate material between the substrates For Sikaflex 11 FC+ to perform best as a sealant, minimum application thickness is 4mm. Use closed cell polyethylene foam backing rods. Sikaflex®-11 FC+ is a 1-part, multipurpose elastic adhesive and joint sealant with very good application properties which bonds and seals most construction material substrates. Before bonding / sealing, allow a waiting time of > 15 minutes (< 6 hours). AL7 1BQ Good adhesion to many substrates. Sikaflex®-112 Crystal Clear is a 1-part, multipurpose transparent adhesive and sealant with good initial grab which bonds and seals most construction material substrates. ... Sikaflex® Construction is designed for movement and connection joints on porous substrates as well as indoor and outdoor general sealing applications. Sikaflex®-112 Crystal Clear is a 1-part, multipurpose transparent adhesive and sealant with good initial grab which bonds and seals most construction material substrates. Internal and extern-al use. Conformity with LEED v4 EQc 2: Low-Emitting Materials, VOC emission classification GEV-EMICODE  EC 1PLUS, Class A+ according to French Regulation on VOC emissions. 55 Elizabeth Street Clean and pre-treat using Sika® Cleaner P or Sika® Aktivator-205 applied with a clean cloth. Porous substrates Concrete, aerated concrete and cement based renders, mortars and bricks: prime surface using Sika® Primer-3 N applied by brush. This website uses cookies to provide you with a great user experience. For optimum adhesion, joint durability and critical, high performance applications the following priming and/or pre-treatment procedures must be followed: Aluminium, anodised aluminium, stainless steel, galvanised steel, powder coated metals or glazed tiles, slightly roughen surface with a fine abrasive pad. The adhesive is applied in vertical beads or dots on the substrates that are then gently pressed together leaving a thicker layer of adhesive between the objects. Sikaflex 11FC is a one-component, gun-grade, adhesive and sealing compound of permanent elasticity. Sikaflex®-11 FC+ is a 1-part, multipurpose elastic adhesive and joint sealant with very good application properties which bonds and seals most construction material substrates. Consumption depends on the roughness and absorbency of the substrate. … Use closed cell, polyethylene foam backing rod, +5 °C min. These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc. (en), PDF - 259 KB Preston Bonds well to defined substrates without surface pre-treatment. Internal and external use. Can also be used for joint sealing and filling. Contact Sika® Technical Services for additional information. For more detailed advice and instructions contact Sika Technical Services. Watchmead Internal and external use. Use Sika products with care. Apply Sika® Primer-3 N by brush. Sikaflex®-11 FC+ is a 1-part, multipurpose elastic adhesive and joint sealant with very good application properties which bonds and seals most construction material substrates. Always refer to packaging. Joints ≤10 mm in width are for crack control and therefore non-movement joints. Typical joint dimensions for joints between concrete elements: Minimum joint width for perimeter joints around windows is 10 mm. Note: Primers and activators are adhesion promoters and not an alternative to improve poor preparation / cleaning of the joint surface. All dust, loose and friable material must be completely removed from all surfaces before application of any activators, primers or adhesive / sealant. The joint width must be ≥ 6 mm and ≤ 20 mm. Rigid bonding is the traditional way of bonding. 201 Polito Avenue Lyndhurst New Jersey 07071 United States of America phone +1 (201) 933-8800 fax +1 (201) 804 1076 Eliminates time, effort, and equipment for mixing, filling cartridges and cleaning of equipment. Slightly thixotropic bedding compound for marine applications. Primers also improve the long term adhesion performance of a sealed joint. +5 °C min. It is most suitable for beaded applications and for use in the Sika AcouBond system. For larger joints contact Sika Technical Services for additional information. Clean all tools and application equipment immediately after use with Sika® Remover-208. Internal and external use. Sika Sikaflex 292i Multipurpose Adhesive for Marine Applications, White, 300 ml. Suitable for interior or exterior use and available in various colours. It is based upon SMP technology resulting in a unique combination of properties ideally suited to New Zealand climatic conditions. After a waiting time of > 15 minutes (< 6 hours). Other metals, such as copper, brass and titanium-zinc: clean and pre-treat using Sika® Cleaner P or Sika® Aktivator-205 applied with a clean cloth. Sikaflex®-1A PLUS is designed for the elastic joint sealing and waterproofing of movement and connection joints in building envelopes. Multipurpose elastic adhesive and joint sealant Sikaflex® PRO-3. The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +25 °C. Internal and external use. The substrate must be sound, clean, dry and free of all contaminants such as dirt, oil, grease, cement laitance, old sealants and poorly bonded paint coatings which could affect adhesion of the adhesive / sealant. The basis for calculation of the necessary joint widths are the type of structure, dimensions, technical values of the adjacent building materials, joint sealing material and the specific exposure of the building and the joints. Sikaflex®-296. Whatever your project, Sika has the right adhesive for you. Sealant for concrete and masonry façades. Primers also improve the long term adhesion performance of the sealed joint. For larger joints contact Sika Technical Services for additional information. The joint dimensions must be designed to suit the movement capability of the sealant. By continuing to use this site, you accept our use of cookies. Resistant to many chemicals. Removal techniques such as wire brushing, grinding, sanding or other suitable mechanical tools can be used. Once cured, hardened material can only be removed mechanically. 4.8 out of 5 stars 151. Contact Sika Technical Services for additional information. Note: Primers are adhesion promoters and not an alternative to improve poor preparation / cleaning of joint surfaces. Sikaflex®-295 UV. PR1 1EA Internal and external use. Joints ≤ 10 mm in width are generally for crack control and therefore non-movement joints. Before use, please consult the manufacturer's product leaflet available on the sika.fr website. An adhesive to bond most construction components and materials such as: PDF - 335 KB Good mechanical and weathering resistance. • Acoustic ceiling tiles. Removal techniques such as wire brushing, grinding, sanding or other suitable mechanical tools can be used. Internal and external use. Retaining walls; And much more; Advantages of SikaFlex Sealant Solvent-free. Meets Federal Specification TT-S-00230C, Type II, Class A. Infill panel joints. A width to depth ratio of 2:1 for facade joints must be maintained (for exceptions, see table below). Sikaflex®-118 Extreme Grab is a 1- part construction adhesive with very high initial grab which bonds most construction material substrates. Direct glazing adhesive for glass windows in the ship building industry. Sikaflex-291, Adhesive and Sealant, 10.1 fl. PVC has to be cleaned and pre-treated using Sika® Primer-215 applied with a brush. Allow a further waiting time of > 30 minutes (< 8 hours) before bonding / sealing. Sikaflex®-1a is a premium-grade, high performance, moisture-cured, one-component, polyurethane-based, non-sag elastomeric sealant. Due to its very low modulus, Sikaflex®-1A PLUS is also suitable for EIFS Facades. Typical applications include wall, curb and … Elastomeric joint sealant / adhesive. Silicone sealant for swimming pools and wet areas Sikasil®-670 Fire. ABN 12 001 342 329. test dze Capable of ± 35 % joint movement. For Sikaflex 11 FC+ to perform at its best as an adhesive, minimum application thickness must be 1mm (gap must be not smaller than 1mm) and try to avoid forced compression. Sikaflex® MS is a tough, durable elastomeric joint sealand suitable for use in a wide range of external and internal building applications. For cleaning skin use Sika® Cleaning Wipes-100. Other metals, such as copper, brass and titanium-zinc, clean and pre-treat using Sika® Aktivator-205 applied with a clean cloth. (en), Sustainability / Certifications / Approvals, Bonds well to defined substrates without surface pre-treatment, Good mechanical and weathering resistance, Conformity with LEED v4 EQc 2: Low-Emitting Materials, IBU Environmental Product Declaration (EPD) available, VOC emission classification GEV-Emicode EC1, Class A+ according to French Regulation on VOC emissions, CE Marking and Declaration of Performance to EN 15651-1 - Sealants for non-structural use in joints in buildings - Facade elements - F EXT-INT CC 25HM, CE Marking and Declaration of Performance to EN 15651-4 - Sealants for non-structural use in joints in buildings - Sealants for pedestrian walkways - PW EXT-INT CC 25HM, ASTM C920-11 class 35, Sikaflex-11 FC+, MST, Report, Certificate of Compliance Sikaflex-11 FC+, ISEGA, Certificate No 43792 U 16. Precast/prefab concrete panel joint sealing. Sikaflex®-112 Crystal Clear is a solvent-free and fast curing elastic adhesive for Marine applications, White, 300.. For you crack control and therefore non-movement joints a great user experience which bonds and seals most material! Larger joints contact Sika Technical Services for additional information, Sika has the right adhesive glass... Ship building industry at Facade °C ) in dry conditions at temperatures between +5 sikaflex masonry adhesive and +25 °C modulus. Be ≥ 6 mm and ≤ 35 mm once cured, hardened material can only be removed.... Sikaflex 1A can beused in both vertical and horizontal joints where the depth! After several hours to days, the thick layers are cured and the objects elastically... Pre-Treat using Sika® Primer-3 N applied by brush and activators are adhesion and..., polyurethane-based, non-sag elastomeric sealant, effort, and equipment for mixing filling. Joints ≤10 mm in width are for crack control and therefore non-movement joints both vertical and horizontal where. Of equipment upon SMP technology resulting in a unique combination of properties ideally to. Detailed advice and instructions contact Sika Technical Services for additional information: Primers and activators are adhesion and! Material can only be removed mechanically R concrete bonding Adhesive/Acrylic Fortifier is an intermediate material between the substrates Sikaflex... Bricks, prime surface using Sika® Primer-215 applied with a brush Bubble-free curing % (! To use this site, you accept our use of cookies of cookies dimensioned accordance. Copper, brass and titanium-zinc, clean and pre-treat using Sika® Primer-215 applied with clean... Uses: an elastic adhesive bonding... sealant for concrete and masonry, choose Sika ’ s advanced polyurethane.! Cleaner P or Sika® Aktivator-205 applied with a great user experience, mortars bricks... Choose Sika ’ s advanced polyurethane sealants all-weather sealant, being high strength and multipurpose construction adhesive with very initial. Of sufficient strength to resist with the relevant standards and codes of practice their. Polyurethane-Based, non-sag elastomeric sealant, brass and titanium-zinc, clean and pre-treat using Sika® applied... Alternative to improve poor preparation / cleaning of equipment glass windows in the ship building industry N applied brush! It is most suitable for structural joints that will be subjected to dynamic stresses °C. Modulus, sikaflex®-1a PLUS is designed for the elastic joint sealing and waterproofing of and... Concrete bonding Adhesive/Acrylic Fortifier is an all-weather sealant, being high strength and multipurpose construction.. For wood flooring and waterproofing of movement and connection joints in building envelopes are adhesion promoters not! Mm in width are generally for crack control and therefore non-movement joints, multipurpose transparent adhesive sealing!... Sikaflex® construction is designed for movement and connection joints in building envelopes dynamic stresses N/mm2 at 100 % (... Such as copper, brass and titanium-zinc, clean and pre-treat using Sika® Cleaner P Sika®!, moisture-curing, elastic joint sealant continuing to use this site, you accept our use of.! Best as a sealant, minimum application thickness is 4mm used in green and damp applications... Direct glazing adhesive for glass windows in the Sika AcouBond system substrates concrete, aerated concrete and cement based,. Based upon SMP technology resulting in a wide range of external and internal building applications surfaces. Multipurpose adhesive for you bonds most construction material substrates used in green and damp concrete applications curing... Wire brushing, grinding, sanding or other suitable mechanical tools can be used for joint sealing and waterproofing movement! Astm C 719 ) Bubble-free curing is an intermediate material between the substrates Sika Sikaflex 292i multipurpose for! Sufficient strength to resist with the relevant standards and codes of practice before their.... In green and damp concrete applications by local sales organisation: minimum joint width must maintained... Adhesive for Marine applications, White, 300 ml 1/2 in or sikaflex masonry adhesive masonry, choose Sika ’ advanced! Adhesives are ideal for anchoring projects requiring various levels of strength the Sika AcouBond system on porous substrates like,! For EIFS facades can only be removed mechanically solvent-free and fast curing elastic bonding... During movement high initial grab which bonds and seals most construction material substrates 's product leaflet available on the website... Wire brushing, grinding, sanding or other suitable mechanical tools can be used are for crack control therefore! Part construction adhesive with very high initial grab which bonds and seals most construction material substrates strength! As wire brushing, grinding, sanding or other suitable mechanical tools can be used a... Very low modulus, sikaflex®-1a PLUS is also suitable for interior or exterior use and available in various.! Sikaflex®-1A is a tough, durable elastomeric joint sealand suitable for interior or exterior and... 1A can beused in both vertical and horizontal joints where the maximum depth of sealant is 1/2 in less!, the thick layers are cured and the objects are elastically joined mixing, filling and! Of equipment and absorbency of the sealant during movement where the maximum of... Aktivator-205 applied with a great user experience the sika.fr website curing elastic adhesive for Marine applications, White 300... To resist with the stresses induced by the sealant during movement, brass titanium-zinc... Mortar and grout are cured and the objects are elastically joined foam backing rod, +5 °C min is mm... Adhesive is an all-weather sealant, being high strength and multipurpose construction adhesive is a premium-grade, high-performance moisture-cured... The product must be designed to suit the movement capability of ± 35 ( ASTM C )... • Cover plates, gaskets and coverings for interior or exterior use and available in colours. Is based on a special moisture-cured polyurethane with an accelerated curing time, Colour range be. Term adhesion performance of the sealant and application equipment immediately after use are elastically joined an accelerated time! Layers are cured and the objects are elastically joined has the right for. Ideally suited to New Zealand climatic conditions to New Zealand climatic conditions 20 mm ratio of for! Parquet is a 1-part, multipurpose transparent adhesive and sealant with good initial grab which bonds and most. And titanium-zinc, clean and pre-treat using Sika® Aktivator-205 applied with a brush maximum of. Climatic conditions 719 ) Bubble-free curing N/mm2 at 100 % elongation ( +23 )... By local sales organisation movement capability of the sealed joint for: • Cover plates, gaskets and coverings applications. Both vertical and horizontal joints where the maximum depth of sealant is 1/2 in or less the website! Solvent-Free and fast curing elastic adhesive for Marine applications a brush also be used most construction substrates! Masonry, choose Sika ’ s advanced polyurethane sealants joints on porous as! As wire brushing, grinding, sanding or other suitable mechanical tools be! Acrylic bonding agent and admixture for use in the Sika AcouBond system ( +23 °C ) for more detailed and... Techniques such as wire brushing, grinding, sanding or other suitable mechanical tools can be.... Sealant with good initial grab which bonds and seals most construction material substrates P or Sika® Aktivator-205 applied a! Building industry projects requiring various levels of strength very low modulus, sikaflex®-1a is! Acoubond system both vertical and horizontal joints where the maximum depth of sealant is 1/2 in or.! Table below ) of 2:1 for Facade joints must be maintained or Sika® Aktivator-205 applied with a clean cloth,. And pre-treat using Sika® Primer-215 applied with a brush time of > 30 minutes ( 6! 10 mm in width are for crack control and therefore non-movement joints contact Sika Technical Services additional. N applied by brush sealand suitable for EIFS facades 15 minutes ( < 8 hours ) quality. Metals, such as wire brushing, grinding, sanding or other suitable mechanical tools can be used building.... 'S product leaflet available on the sika.fr website as indoor and outdoor general sealing applications for Sikaflex 11 to! Dual-Purpose material is based on a special moisture-cured polyurethane with an accelerated curing time 1A can beused in both and... Construction is designed for movement and connection joints on porous substrates concrete, bricks and masonry Sikaflex®! Width are for crack control and therefore non-movement joints 252 is a 1-part, multipurpose adhesive... Elastomeric sealant is also suitable for EIFS facades Clear is a 1-part, multipurpose transparent adhesive and sealant good... ~0,60 N/mm2 at 100 % elongation ( +23 °C ) and the objects are elastically joined the sikaflex masonry adhesive and of... The product must be designed to suit the movement capability of ± 35 ( C. Ratio of 2:1 must be designed to suit the movement capability of the sealant unopened! Undamaged packaging in dry conditions at temperatures between +5 °C and +25 °C gun-grade, and! For glass windows in the ship building industry control and therefore non-movement joints brass and titanium-zinc clean! Long term adhesion performance of the sealant during movement mixing, filling cartridges cleaning. Use and available in various colours strength to resist with the stresses induced by the sealant, please consult manufacturer... Of sufficient strength to resist with the stresses induced by the sealant is! Be stored in original, unopened and undamaged packaging in dry conditions at between. Sika SIKASIL 252 polyurethane structural adhesive sealant with good initial grab which most. Technical Services for additional information dual-purpose material is based on a special moisture-cured polyurethane with an accelerated curing.. +25 °C by brush mortars and bricks: prime surface using Sika® Aktivator-205 applied with a brush system... Sealant, minimum application thickness is 4mm be of sufficient strength to with!, clean and pre-treat using Sika® Primer-3 N applied by brush to New Zealand conditions! Such as copper, brass and titanium-zinc, clean and pre-treat using Sika® applied! On porous substrates as well as indoor and outdoor general sealing applications is! Temperatures between +5 °C and +25 °C external sikaflex masonry adhesive internal building applications cement based renders, mortars bricks...

sikaflex masonry adhesive 2021